MasterFlow

The 54mm End Feed Equal Tee splits a 54mm copper run three ways — two ends in line and one branch at 90°, all 54mm. The largest equal tee in the ra...

The 54mm End Feed Long Radius Street Elbow turns a run of 54mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...

The 54mm End Feed Stop End caps off a 54mm copper pipe with a single soldered capillary joint — the largest cap in the range, for terminating 54mm ...

The 54mm End Feed Street Elbow 90° turns a run of 54mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 54mm × 15mm End Feed Fitting Reducer is an internal reducer with a 54mm spigot end that pushes inside a 54mm fitting, and a 15mm socket that ta...

The 54mm × 2" End Feed Female Iron Straight Adaptor joins 54mm copper tube to a 2" BSP male thread — soldered capillary joint on the copper end, fe...

The 54mm × 2" End Feed Male Iron Straight Adaptor joins 54mm copper tube to a 2" BSP female thread — soldered capillary joint on the copper end, ma...

The 54mm × 22mm End Feed Fitting Reducer is an internal reducer with a 54mm spigot end that pushes inside a 54mm fitting, and a 22mm socket that ta...

The 54mm × 28mm End Feed Fitting Reducer is an internal reducer with a 54mm spigot end that pushes inside a 54mm fitting, and a 28mm socket that ta...

The 54mm × 35mm End Feed Fitting Reducer is an internal reducer with a 54mm spigot end that pushes inside a 54mm fitting, and a 35mm socket that ta...

The 54mm × 35mm End Feed Reducing Coupler is an external reducer that joins 54mm copper tube to 35mm copper tube in a straight run with a soldered ...

The 54mm × 42mm End Feed Fitting Reducer is an internal reducer with a 54mm spigot end that pushes inside a 54mm fitting, and a 42mm socket that ta...

The 54mm × 42mm End Feed Reducing Coupler is an external reducer that joins 54mm copper tube to 42mm copper tube in a straight run with a soldered ...

The 54mm × 42mm × 42mm End Feed Reducing Tee connects 54mm and 42mm in line (the run) with a 42mm branch at 90°. A reduced end-and-branch tee — off...

The 54mm × 42mm × 54mm End Feed Reducing Tee connects 54mm and 42mm in line (the run) with a 54mm branch at 90°. A reduced-end tee — one end of the...

The 54mm × 54mm × 15mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 54mm × 54mm × 22mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 28mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 28mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 35mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 35mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 42mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 42mm branch at 90°. A reduced-branch tee — for takin...

The 8mm End Feed 90° Elbow turns a run of 8mm copper tube through a right angle with a soldered capillary joint. Used on 8mm microbore heating pipe...

The 8mm End Feed Equal Tee splits an 8mm copper run three ways — two ends in line and one branch at 90°, all 8mm. Used to take an 8mm branch off an...

The 8mm End Feed Stop End caps off an 8mm copper pipe with a single soldered capillary joint — the clean way to terminate a run permanently, whethe...