MasterFlow

The 22mm End Feed Part Crossover lets one 22mm copper pipe pass over another without notching or bending on site — a factory-formed offset with a s...

The 22mm End Feed Slip Coupler joins two lengths of 22mm copper tube in a straight run with a soldered capillary joint. With no internal tube stop ...

The 22mm End Feed Stop End caps off a 22mm copper pipe with a single soldered capillary joint — for terminating main runs, cylinder pipework and re...

The 22mm End Feed Street Elbow 90° turns a run of 22mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 22mm × 1" End Feed Bent Cylinder Union connects 22mm copper to a 1" BSP male boss with a swivel union nut, turning through 90° — soldered capil...

The 22mm × 1" End Feed Straight Cylinder Union connects 22mm copper to a 1" BSP male boss with a swivel union nut — soldered capillary joint on the...

The 22mm × 15mm End Feed Fitting Reducer is an internal reducer with a 22mm spigot end that pushes inside a 22mm fitting, and a 15mm socket that ta...

The 22mm × 15mm End Feed Reducing Coupler is an external reducer that joins 22mm copper tube to 15mm copper tube in a straight run with a soldered ...

The 22mm × 15mm × 15mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off...

The 22mm × 15mm × 22mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 22mm branch at 90°. A reduced-end tee — one end of the...

The 22mm × 22mm × 15mm End Feed Reducing Tee runs straight through at 22mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — the commo...

The 22mm × 22mm × 28mm End Feed Reducing Tee runs at 22mm on both ends with a larger 28mm branch at 90°. A reduced-ends tee — the branch is the big...

The 22mm × 28mm × 15mm End Feed Reducing Tee connects 22mm and 28mm in line (the run) with a 15mm branch at 90°. A stepped tee — the two run ends a...

The 22mm × ½" End Feed Male Iron Straight Adaptor joins 22mm copper tube to a ½" BSP female thread — soldered capillary joint on the copper end, ma...

The 22mm × ¾" End Feed Bent Tap Connector joins 22mm copper tube to a ¾" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...

The 22mm × ¾" End Feed Female Iron Elbow turns 22mm copper through 90° onto a ¾" BSP female thread — soldered capillary joint on the copper end, fe...

The 22mm × ¾" End Feed Female Iron Straight Adaptor joins 22mm copper tube to a ¾" BSP male thread — soldered capillary joint on the copper end, fe...

The 22mm × ¾" End Feed Male Iron Elbow turns 22mm copper through 90° onto a ¾" BSP male thread — soldered capillary joint on the copper end, male t...

The 22mm × ¾" End Feed Male Iron Straight Adaptor joins 22mm copper tube to a ¾" BSP female thread — soldered capillary joint on the copper end, ma...

The 22mm × ¾" End Feed Straight Cylinder Union connects 22mm copper to a ¾" BSP male boss with a swivel union nut — soldered capillary joint on the...

The 22mm × ¾" End Feed Straight Tap Connector joins 22mm copper tube to a ¾" BSP tap or valve tail. It has a soldered capillary end for the copper ...

The 28mm End Feed 45° Obtuse Elbow turns a run of 28mm copper tube through 45° with a soldered capillary joint. The gentler bend eases 28mm primari...

The 28mm End Feed 45° Obtuse Street Elbow turns a run of 28mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...