22mm × ¾" End Feed Straight Tap Connector — Copper
The 22mm × ¾" End Feed Straight Tap Connector joins 22mm copper tube to a ¾" BSP tap or valve tail. It has a soldered capillary end for the copper tube and a swivel union nut with a fibre washer at the threaded end, so the tail seals without jointing compound and can be undone for servicing. Used where a 22mm supply feeds a ¾" tap, bath or appliance. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.
Also known as: tap connector, straight tap connector, tap tail connector, tap coupling, swivel tap connector, ¾ inch tap connector, 22mm tap connector, endfeed tap connector.
- Manufactured to BS EN 1254-1 for capillary (solder) fittings
- Connects 22mm tube to a ¾" tap/valve tail — swivel nut and washer
- Straight pattern
- Fits copper tube to BS EN 1057
- WRAS approved
- Solder and flux required — not supplied
- Sold individually — buy exactly what the job needs
- Suitable for hot and cold water and heating services
End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.
Also in this range: couplers, elbows and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.
