MasterFlow

The 15mm × 12mm End Feed Reducing Coupler is an external reducer that joins 15mm copper tube to 12mm copper tube in a straight run with a soldered ...

The 15mm × 15mm × 10mm End Feed Reducing Tee runs straight through at 15mm and takes a reduced 10mm branch at 90°. A reduced-branch tee — for dropp...

The 15mm × 15mm × 22mm End Feed Reducing Tee runs at 15mm on both ends with a larger 22mm branch at 90°. A reduced-ends tee — the branch is the big...

The 15mm × 8mm End Feed Fitting Reducer is an internal reducer with a 15mm spigot end that pushes inside a 15mm fitting, and an 8mm socket that tak...

The 15mm × 8mm End Feed Long Tail Fitting Reducer is an internal reducer with an extended 15mm spigot (the long tail) that pushes inside a 15mm fit...

The 15mm × 8mm End Feed Reducing Coupler is an external reducer that joins 15mm copper tube to 8mm copper tube in a straight run with a soldered ca...

The 15mm × ¼" End Feed Male Iron Straight Adaptor joins 15mm copper tube to a ¼" BSP female thread — soldered capillary joint on the copper end, ma...

The 15mm × ½" End Feed Bent Tap Connector joins 15mm copper tube to a ½" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...

The 15mm × ½" End Feed Female Iron Elbow turns 15mm copper through 90° onto a ½" BSP female thread — soldered capillary joint on the copper end, fe...

The 15mm × ½" End Feed Female Iron Straight Adaptor joins 15mm copper tube to a ½" BSP male thread — soldered capillary joint on the copper end, fe...

The 15mm × ½" End Feed Male Iron Elbow turns 15mm copper through 90° onto a ½" BSP male thread — soldered capillary joint on the copper end, male t...

The 15mm × ½" End Feed Male Iron Straight Adaptor joins 15mm copper tube to a ½" BSP female thread — soldered capillary joint on the copper end, ma...

The 15mm × ½" End Feed Straight Tap Connector joins 15mm copper tube to a ½" BSP tap or valve tail. It has a soldered capillary end for the copper ...

The 15mm × ½" End Feed Wallplate Elbow turns 15mm copper through 90° onto a ½" BSP female thread, with a backplate that screws to the wall or joine...

The 15mm × ¾" End Feed Bent Tap Connector joins 15mm copper tube to a ¾" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...

The 15mm × ¾" End Feed Female Iron Straight Adaptor joins 15mm copper tube to a ¾" BSP male thread — soldered capillary joint on the copper end, fe...

The 15mm × ¾" End Feed Straight Tap Connector joins 15mm copper tube to a ¾" BSP tap or valve tail. It has a soldered capillary end for the copper ...

The 22mm End Feed 45° Obtuse Elbow turns a run of 22mm copper tube through 45° with a soldered capillary joint. The gentler bend eases 22mm main ru...

The 22mm End Feed 45° Obtuse Street Elbow turns a run of 22mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...

The 22mm End Feed 90° Elbow turns a run of 22mm copper tube through a right angle with a soldered capillary joint. Used on 22mm main hot and cold r...

The 22mm End Feed Air Vent Cap caps a 22mm copper tube end with a manual air vent — a soldered capillary socket with a vent screw for releasing tra...

The 22mm End Feed Equal Tee splits a 22mm copper run three ways — two ends in line and one branch at 90°, all 22mm. Used to take a 22mm branch off ...

The 22mm End Feed Full Crossover lets one 22mm copper pipe pass cleanly over another with a full factory-formed offset — soldered capillary socket ...

The 22mm End Feed Long Radius Street Elbow turns a run of 22mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...