15mm × ¾" End Feed Straight Tap Connector — Copper
The 15mm × ¾" End Feed Straight Tap Connector joins 15mm copper tube to a ¾" BSP tap or valve tail. It has a soldered capillary end for the copper tube and a swivel union nut with a fibre washer at the threaded end, so the tail seals without jointing compound and can be undone for servicing. Commonly used for bath taps and appliances fed in 15mm. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.
Also known as: tap connector, straight tap connector, tap tail connector, tap coupling, swivel tap connector, ¾ inch tap connector, 15mm tap connector, endfeed tap connector.
- Manufactured to BS EN 1254-1 for capillary (solder) fittings
- Connects 15mm tube to a ¾" tap/valve tail — swivel nut and washer
- Straight pattern
- Fits copper tube to BS EN 1057
- WRAS approved
- Solder and flux required — not supplied
- Sold individually — buy exactly what the job needs
- Suitable for hot and cold water and heating services
End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.
Also in this range: couplers, elbows and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.
