22mm × 22mm × 15mm End Feed Reducing Tee (Reduced Branch) — Copper
Free Local Shipping
Free Local Shipping on orders over £100. Standard delivery to most UK postcodes within 2-3 working days. Express options available at checkout.
Contact Us
Give Us A Call +44 118 958 8882 Our team is here to help. We will provide expert advice on specifications, compatibility, and delivery options.
30-day Easy Return
30 days Easy Return — no questions asked. If you're not completely satisfied, send it back within 14 days for a full refund.
The 22mm × 22mm × 15mm End Feed Reducing Tee runs straight through at 22mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — the common way to drop a 15mm branch (a radiator or fixture leg) off a 22mm run. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.
This is a reduced-branch tee — the run is 22mm, the branch reduces to 15mm.
Also known as: reducing tee, branch reduced tee, reducing branch tee, unequal tee, 22x22x15 tee, endfeed reducing tee.
- Manufactured to BS EN 1254-1 for capillary (solder) fittings
- Reduced-branch tee — 22mm × 22mm × 15mm
- Fits copper tube to BS EN 1057
- WRAS approved
- Solder and flux required — not supplied
- Sold individually — buy exactly what the job needs
- Suitable for hot and cold water and heating services
End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.
Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.
