MasterFlow

The 35mm End Feed 90° Elbow turns a run of 35mm copper tube through a right angle with a soldered capillary joint. Used on 35mm commercial risers, ...

The 35mm End Feed Equal Tee splits a 35mm copper run three ways — two ends in line and one branch at 90°, all 35mm. Used on 35mm commercial risers ...

The 35mm End Feed Long Radius Street Elbow turns a run of 35mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...

The 35mm End Feed Stop End caps off a 35mm copper pipe with a single soldered capillary joint — for terminating 35mm commercial risers and plant pi...

The 35mm End Feed Street Elbow 90° turns a run of 35mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 35mm × 15mm End Feed Fitting Reducer is an internal reducer with a 35mm spigot end that pushes inside a 35mm fitting, and a 15mm socket that ta...

The 35mm × 1¼" End Feed Female Iron Straight Adaptor joins 35mm copper tube to a 1¼" BSP male thread — soldered capillary joint on the copper end, ...

The 35mm × 1¼" End Feed Male Iron Straight Adaptor joins 35mm copper tube to a 1¼" BSP female thread — soldered capillary joint on the copper end, ...

The 35mm × 22mm End Feed Fitting Reducer is an internal reducer with a 35mm spigot end that pushes inside a 35mm fitting, and a 22mm socket that ta...

The 35mm × 22mm End Feed Reducing Coupler is an external reducer that joins 35mm copper tube to 22mm copper tube in a straight run with a soldered ...

The 35mm × 22mm × 35mm End Feed Reducing Tee connects 35mm and 22mm in line (the run) with a 35mm branch at 90°. A reduced-end tee — one end of the...

The 35mm × 28mm End Feed Fitting Reducer is an internal reducer with a 35mm spigot end that pushes inside a 35mm fitting, and a 28mm socket that ta...

The 35mm × 28mm End Feed Reducing Coupler is an external reducer that joins 35mm copper tube to 28mm copper tube in a straight run with a soldered ...

The 35mm × 28mm × 15mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off...

The 35mm × 28mm × 22mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 22mm branch at 90°. A reduced end-and-branch tee — off...

The 35mm × 28mm × 28mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 28mm branch at 90°. A reduced end-and-branch tee — off...

The 35mm × 28mm × 35mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 35mm branch at 90°. A reduced-end tee — one end of the...

The 35mm × 35mm × 15mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 35mm × 35mm × 22mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 35mm × 35mm × 28mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 28mm branch at 90°. A reduced-branch tee — for takin...

The 42mm End Feed 45° Obtuse Elbow turns a run of 42mm copper tube through 45° with a soldered capillary joint. The gentler bend eases 42mm commerc...

The 42mm End Feed 45° Obtuse Street Elbow turns a run of 42mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...

The 42mm End Feed 90° Elbow turns a run of 42mm copper tube through a right angle with a soldered capillary joint. Used on 42mm commercial risers a...