masterflow

The 28mm End Feed 90° Elbow turns a run of 28mm copper tube through a right angle with a soldered capillary joint. Used on 28mm primaries, gravity ...

The 28mm End Feed Equal Tee splits a 28mm copper run three ways — two ends in line and one branch at 90°, all 28mm. Used on 28mm primaries and grav...

The 28mm End Feed Long Radius Street Elbow turns a run of 28mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...

The 28mm End Feed Slip Coupler joins two lengths of 28mm copper tube in a straight run with a soldered capillary joint. With no internal tube stop ...

The 28mm End Feed Stop End caps off a 28mm copper pipe with a single soldered capillary joint — for terminating 28mm primaries and redundant gravit...

The 28mm End Feed Street Elbow 90° turns a run of 28mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 28mm × 1" End Feed Female Iron Straight Adaptor joins 28mm copper tube to a 1" BSP male thread — soldered capillary joint on the copper end, fe...

The 28mm × 1" End Feed Male Iron Straight Adaptor joins 28mm copper tube to a 1" BSP female thread — soldered capillary joint on the copper end, ma...

The 28mm × 1" End Feed Straight Cylinder Union connects 28mm copper to a 1" BSP male boss with a swivel union nut — soldered capillary joint on the...

The 28mm × 15mm End Feed Fitting Reducer is an internal reducer with a 28mm spigot end that pushes inside a 28mm fitting, and a 15mm socket that ta...

The 28mm × 15mm End Feed Reducing Coupler is an external reducer that joins 28mm copper tube to 15mm copper tube in a straight run with a soldered ...

The 28mm × 15mm × 15mm End Feed Reducing Tee connects 28mm and 15mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off...

The 28mm × 15mm × 22mm End Feed Reducing Tee connects 28mm and 15mm in line (the run) with a 22mm branch at 90°. A reduced end-and-branch tee — off...

The 28mm × 15mm × 28mm End Feed Reducing Tee connects 28mm and 15mm in line (the run) with a 28mm branch at 90°. A reduced-end tee — one end of the...

The 28mm × 22mm End Feed Fitting Reducer is an internal reducer with a 28mm spigot end that pushes inside a 28mm fitting, and a 22mm socket that ta...

The 28mm × 22mm End Feed Reducing Coupler is an external reducer that joins 28mm copper tube to 22mm copper tube in a straight run with a soldered ...

The 28mm × 22mm × 15mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off...

The 28mm × 22mm × 22mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 22mm branch at 90°. A reduced end-and-branch tee — off...

The 28mm × 22mm × 28mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 28mm branch at 90°. A reduced-end tee — one end of the...

The 28mm × 28mm × 15mm End Feed Reducing Tee runs straight through at 28mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 28mm × 28mm × 22mm End Feed Reducing Tee runs straight through at 28mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 35mm End Feed 45° Obtuse Elbow turns a run of 35mm copper tube through 45° with a soldered capillary joint. The gentler bend eases 35mm commerc...

The 35mm End Feed 45° Obtuse Street Elbow turns a run of 35mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...