End Feed Copper Fittings

The 28mm × 1" End Feed Straight Cylinder Union connects 28mm copper to a 1" BSP male boss with a swivel union nut — soldered capillary joint on the...

The 15mm × ½" End Feed Female Iron Straight Adaptor joins 15mm copper tube to a ½" BSP male thread — soldered capillary joint on the copper end, fe...

The 15mm × ¼" End Feed Male Iron Straight Adaptor joins 15mm copper tube to a ¼" BSP female thread — soldered capillary joint on the copper end, ma...

The 35mm End Feed Stop End caps off a 35mm copper pipe with a single soldered capillary joint — for terminating 35mm commercial risers and plant pi...

The 15mm × 15mm × 22mm End Feed Reducing Tee runs at 15mm on both ends with a larger 22mm branch at 90°. A reduced-ends tee — the branch is the big...

The 22mm × 15mm × 15mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off...

The 22mm × 15mm × 22mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 22mm branch at 90°. A reduced-end tee — one end of the...

The 22mm × 22mm × 15mm End Feed Reducing Tee runs straight through at 22mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — the commo...

The 22mm End Feed Equal Tee splits a 22mm copper run three ways — two ends in line and one branch at 90°, all 22mm. Used to take a 22mm branch off ...

The 22mm End Feed Long Radius Street Elbow turns a run of 22mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...

The 15mm End Feed Long Radius Street Elbow turns a run of 15mm copper tube through 90° on a long, sweeping radius, with one male (spigot) end and o...

The 22mm End Feed 45° Obtuse Street Elbow turns a run of 22mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...

The 15mm End Feed 45° Obtuse Street Elbow turns a run of 15mm copper tube through 45°, with one male (spigot) end and one female (socket) end. The ...

The 22mm End Feed Street Elbow 90° turns a run of 22mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 15mm End Feed Street Elbow 90° turns a run of 15mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. T...

The 15mm × 10mm End Feed Long Tail Fitting Reducer is an internal reducer with an extended 15mm spigot (the long tail) that pushes inside a 15mm fi...

The 22mm End Feed Air Vent Cap caps a 22mm copper tube end with a manual air vent — a soldered capillary socket with a vent screw for releasing tra...

The 15mm End Feed Air Vent Cap caps a 15mm copper tube end with a manual air vent — a soldered capillary socket with a vent screw for releasing tra...

The 22mm End Feed Full Crossover lets one 22mm copper pipe pass cleanly over another with a full factory-formed offset — soldered capillary socket ...

The 15mm End Feed Full Crossover lets one 15mm copper pipe pass cleanly over another with a full factory-formed offset — soldered capillary socket ...

The 22mm End Feed Part Crossover lets one 22mm copper pipe pass over another without notching or bending on site — a factory-formed offset with a s...