15mm × 15mm × 22mm End Feed Reducing Tee (Reduced Ends) — Copper
The 15mm × 15mm × 22mm End Feed Reducing Tee runs at 15mm on both ends with a larger 22mm branch at 90°. A reduced-ends tee — the branch is the biggest connection, so both run ends are effectively reduced relative to it. Handy where a 22mm branch is taken from a 15mm run. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.
This is a reduced-ends tee — both run ends (15mm) are smaller than the 22mm branch.
Also known as: reducing tee, reduced ends tee, both ends reduced tee, unequal tee, 15x15x22 tee, endfeed reducing tee.
- Manufactured to BS EN 1254-1 for capillary (solder) fittings
- Reduced-ends tee — 15mm × 15mm × 22mm
- Fits copper tube to BS EN 1057
- WRAS approved
- Solder and flux required — not supplied
- Sold individually — buy exactly what the job needs
- Suitable for hot and cold water and heating services
End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.
Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.
