Joule Cyclone Platinum 200L Twin Coil Solar Cylinder Short C (TCEMVS-0200NFC) is an indirect unvented hot-water cylinder designed for solar thermal and auxiliary heating systems. It has a listed capacity of 200 litres and a stated actual capacity of 193 litres. The cylinder combines an LDX 2101 stainless-steel inner vessel with two 316L stainless-steel coils to connect separate heat sources.
The twin coils are rated at 16kW and 18kW, each with a stated surface area of 0.58m². Dense PU foam insulation is specified, with a stated heat loss of 1.99kWh/24h. The cylinder also supports one 3kW immersion heater at 230V. Confirm dimensions, system compatibility and installation requirements with a suitably qualified installer.
200L Listed Capacity
193L Actual Capacity
Twin Stainless-Steel Coils
Solar Thermal Compatible
At a Glance
Cylinder Type
Indirect Unvented
Twin-coil solar cylinder
Listed Capacity
200 litres
193 litres actual capacity
Heat Exchangers
2 coils
16kW and 18kW ratings
Model
TCEMVS-0200NFC
Cyclone Platinum Short C
What Is the Joule Cyclone Platinum Twin Coil Solar Cylinder?
This floor-standing cylinder stores domestic hot water in an unvented, mains-fed system. Its two internal coils allow heat to be transferred from separate primary heat sources, such as a solar thermal system and an auxiliary heating system. The supplied specification also lists one 3kW immersion heater. Installation and commissioning should be completed by a suitably qualified and competent person in accordance with the manufacturer’s instructions and applicable regulations.
Key Features
Twin-Coil Design
Two separate heat exchangers provide connection points for solar thermal and auxiliary heat sources.
Two Coil Ratings
The coils are specified at 16kW and 18kW, with a surface area of 0.58m² each.
Stainless-Steel Construction
The inner cylinder is specified as LDX 2101 stainless steel, with 316L stainless-steel coils.
Immersion Heater Support
The specification lists one 3kW immersion heater at 230V.
Insulated Cylinder
Dense PU foam insulation is specified, with a stated heat loss of 1.99kWh/24h.
Pressure and Safety Specifications
The supplied details list a maximum mains water pressure of 10 bar, an operating pressure of 7 bar and testing to BS EN 12897:2016.
Important Installation Guidance:
Unvented hot-water cylinders must be installed and commissioned by a suitably qualified and competent person in accordance with the manufacturer’s instructions and applicable regulations. The installer should confirm the incoming mains supply, discharge arrangements, primary heat sources, electrical requirements and available service clearances. Check the full product dimensions with the supplier before planning the installation.
Key Specifications
| Brand |
Joule / Cyclone |
| Product Group |
Solar |
| Model |
Cyclone Platinum 200L Twin Coil Solar Cylinder Short C |
| Model Code |
TCEMVS-0200NFC |
| ERP Type |
Indirect unvented |
| Listed Capacity |
200L |
| Actual Capacity |
193L |
| Cylinder Material |
LDX 2101 stainless steel |
| Outer Casing |
Coated mild steel |
| Thermal Insulation |
Dense PU foam |
| Heat Loss |
1.99kWh/24h |
| Unit Weight, Empty / Full |
50kg / 247kg |
| Number of Immersion Heaters |
1 |
| Immersion Heater Specification |
3kW at 230V |
| Number of Heat Exchangers |
2 |
| Coil Material |
316L stainless steel |
| Coil 1 Rating |
16kW |
| Coil 2 Rating |
18kW |
| Coil Surface Area |
0.58m² each |
| Coil Maximum Primary Pressure |
3.5 bar each |
| Coil 1 Resistance |
0.05 bar |
| Maximum Mains Water Pressure |
10 bar |
| Operating Pressure |
7 bar |
| Operating Temperature |
60°C |
| Safety Valve Temperature |
90°C |
| Test Standard |
BS EN 12897:2016 |
| Warranty |
1 year |
Who Is This Cylinder For?
The Joule Cyclone Platinum 200L Twin Coil Solar Cylinder Short C is intended for homes and light-commercial properties requiring stored hot water from an indirect unvented system. Its twin coils allow connection to separate heat sources, such as solar thermal and auxiliary heating. Confirm the cylinder’s dimensions, heat-source compatibility, system pressures and hot-water demand with an installer.
Frequently Asked Questions
Is this a direct or indirect cylinder?
It is an indirect unvented cylinder. Heat is transferred to the stored water through its two internal coils. The specification also lists one immersion heater.
What is the cylinder’s actual capacity?
The listed capacity is 200 litres, and the stated actual capacity is 193 litres.
What are the coil ratings?
The two 316L stainless-steel coils are rated at 16kW and 18kW. Each has a stated surface area of 0.58m².
Who should install an unvented cylinder?
A suitably qualified and competent person should install and commission it, following the manufacturer’s instructions and applicable regulations.
Twin-Coil Solar Hot-Water Storage
The Joule Cyclone Platinum 200L Twin Coil Solar Cylinder Short C (TCEMVS-0200NFC) combines 193 litres of stated actual capacity with two stainless-steel coils and support for a 3kW immersion heater. Confirm dimensions, heat-source compatibility, pressure requirements and installation clearances with a qualified installer before ordering.
At GetPlumb, we strive to provide reliable and cost-effective delivery options to our customers. Please review our shipping policy below.
🆓 Free Local Delivery (Orders £100 & above)
We offer FREE delivery on orders £100 or more
for selected local areas.
Eligible Postcodes Include:
- RG*
- SL*
- OX10*, OX11*, OX49*
- HP1*, HP3*, HP8*, HP9*, HP10*, HP11*, HP12*, HP13*, HP14*
- WD*, HA*, UB*, TW*, KT*
- W1* – W9*
- NW*, SW*
Delivery Time: 2–4 working days
Shipping Cost: £0.00
📦 Standard Shipping (Weight-Based Rates)
For orders that do not qualify for free delivery, standard
shipping rates apply based on total cart weight.
- For cart weight between 0–2 kg, the shipping cost is £4.50 with a delivery time of 2–4 working days.
- For cart weight between 2–24 kg, the shipping cost is £9.99 with a delivery time of 2–4 working days.
- For cart weight between 24 kg and above, the shipping cost is £60 with a delivery time of 2–4 working days.
🧱 Block Salt (Harvey’s) – Unit-Based Shipping
This rate applies only to Harvey’s block salt products.
- £7.99 is charged for every 3 items.
- The charge increases by £7.99 for each additional set of 3 items.
Examples:
- 1–3 items → £7.99
- 4–6 items → £15.98
- 7–9 items → £23.97
Delivery Time: 2–4 working days
📏 Large / Long Items (Length-Based Shipping)
For oversized items where the product length is 1.5 metres or more:
Conditions:
- Product length ≥ 1.5 m
- Cart weight ≤ 40 kg
Shipping Cost: £18.00 (flat rate)
Delivery Time: 2–4 working days
Collection from Store
Customers can also choose to collect their order from our store in
Reading, UK, at no additional charge. For any questions regarding shipping, please contact our support team at online@getplumb.co.uk.
