Joule Cyclone Platinum 200L Indirect Short C Unvented Cylinder (TCEMVI-0200NFC) is a stainless-steel hot-water storage cylinder for indirect unvented systems. It has a nominal capacity of 200 litres and a stated usable capacity of 194 litres, with a 23.1kW primary coil. Its short-profile design may suit installations where height is limited. Check the full product dimensions and required service clearances before ordering.
The cylinder is made from LDX 2101 stainless steel and features a 316L stainless-steel heat exchanger rated at 23.1kW, with a stated surface area of 0.58m². It is specified with one 3kW immersion heater at 230V for electric backup, dense PU foam insulation and a heat loss of 1.87kWh/24h. Confirm system compatibility and installation requirements with a suitably qualified installer.
200L Nominal Capacity
194L Usable Capacity
23.1kW Primary Coil
LDX 2101 Stainless Steel
At a Glance
Cylinder Type
Indirect Unvented
Primary coil and immersion heater
Nominal Capacity
200 litres
194 litres usable capacity
Primary Coil Rating
23.1kW
316L stainless-steel heat exchanger
Model
TCEMVI-0200NFC
Cyclone Platinum Short C
What Is the Joule Cyclone Platinum Indirect Cylinder?
This cylinder stores domestic hot water in an unvented, mains-fed system. In indirect operation, a primary heating circuit transfers heat to the stored water through the internal coil. The specification also lists one 3kW immersion heater for electric backup. Installation and commissioning should be carried out by a suitably qualified and competent person in accordance with the manufacturer’s instructions and applicable regulations.
Key Features
200L Nominal Capacity
Provides a stated usable volume of 194 litres for domestic or light-commercial hot-water systems.
Stainless-Steel Construction
The cylinder is specified as LDX 2101 stainless steel, with a coated mild-steel outer casing.
High-Rating Primary Coil
The 316L stainless-steel heat exchanger is rated at 23.1kW and has a stated surface area of 0.58m².
Immersion Heater Backup
The supplied specification lists one 3kW immersion heater at 230V for electric backup.
Insulated Cylinder
Dense PU foam insulation is specified, with a stated heat loss of 1.87kWh/24h.
Pressure and Safety Specifications
The supplied details list a maximum mains water pressure of 10 bar, an operating pressure of 7 bar and testing to BS EN 12897:2016.
Important Installation Guidance:
Unvented hot-water cylinders must be installed and commissioned by a suitably qualified and competent person in accordance with the manufacturer’s instructions and applicable regulations. The installer should confirm the incoming mains supply, discharge arrangements, primary circuit, electrical requirements and available service clearances. Check the product dimensions with the supplier before planning the installation.
Key Specifications
| Brand |
Joule / Cyclone |
| Range |
Cyclone Platinum |
| Model |
Indirect Short C Unvented Cylinder |
| Model Code |
TCEMVI-0200NFC |
| Product Type |
Stainless indirect cylinder |
| Nominal Capacity |
200L |
| Usable Capacity |
194L |
| Cylinder Material |
LDX 2101 stainless steel |
| Outer Casing |
Coated mild steel |
| Thermal Insulation |
Dense PU foam |
| Heat Loss |
1.87kWh/24h |
| Number of Immersion Heaters |
1 |
| Immersion Heater Specification |
3kW at 230V |
| Number of Heat Exchangers |
1 |
| Coil Material |
316L stainless steel |
| Coil Rating |
23.1kW |
| Coil Surface Area |
0.58m² |
| Coil Maximum Primary Pressure |
3.5 bar |
| Coil Resistance |
0.06 bar |
| Maximum Mains Water Pressure |
10 bar |
| Operating Pressure |
7 bar |
| Operating Temperature |
60°C |
| Safety Valve Temperature |
90°C |
| Test Standard |
BS EN 12897:2016 |
| Weight, Empty / Full |
41kg / 241kg |
| Warranty |
1 year |
Who Is This Cylinder For?
The Joule Cyclone Platinum 200L Indirect Short C is intended for larger homes or light-commercial properties needing stored hot water from an indirect unvented system. Its short-profile design may suit installations where height is restricted. Confirm the cylinder dimensions, system pressures, hot-water demand and installation requirements with an installer.
Frequently Asked Questions
Is this a direct or indirect cylinder?
It is an indirect cylinder. A primary heating circuit transfers heat to the stored water through its internal coil. The specification also lists one 3kW immersion heater.
What is its usable capacity?
The nominal capacity is 200 litres, with a stated usable capacity of 194 litres.
What is the primary coil rating?
The 316L stainless-steel coil is rated at 23.1kW and has a stated surface area of 0.58m².
Who should install an unvented cylinder?
A suitably qualified and competent person should install and commission it, following the manufacturer’s instructions and applicable regulations.
Indirect Hot-Water Storage
The Joule Cyclone Platinum 200L Indirect Short C Unvented Cylinder (TCEMVI-0200NFC) combines 194 litres of stated usable storage with a 23.1kW stainless-steel primary coil and a 3kW immersion heater. Confirm dimensions, system compatibility, pressure requirements and installation clearances with a qualified installer before ordering.
At GetPlumb, we strive to provide reliable and cost-effective delivery options to our customers. Please review our shipping policy below.
🆓 Free Local Delivery (Orders £100 & above)
We offer FREE delivery on orders £100 or more
for selected local areas.
Eligible Postcodes Include:
- RG*
- SL*
- OX10*, OX11*, OX49*
- HP1*, HP3*, HP8*, HP9*, HP10*, HP11*, HP12*, HP13*, HP14*
- WD*, HA*, UB*, TW*, KT*
- W1* – W9*
- NW*, SW*
Delivery Time: 2–4 working days
Shipping Cost: £0.00
📦 Standard Shipping (Weight-Based Rates)
For orders that do not qualify for free delivery, standard
shipping rates apply based on total cart weight.
- For cart weight between 0–2 kg, the shipping cost is £4.50 with a delivery time of 2–4 working days.
- For cart weight between 2–24 kg, the shipping cost is £9.99 with a delivery time of 2–4 working days.
- For cart weight between 24 kg and above, the shipping cost is £60 with a delivery time of 2–4 working days.
🧱 Block Salt (Harvey’s) – Unit-Based Shipping
This rate applies only to Harvey’s block salt products.
- £7.99 is charged for every 3 items.
- The charge increases by £7.99 for each additional set of 3 items.
Examples:
- 1–3 items → £7.99
- 4–6 items → £15.98
- 7–9 items → £23.97
Delivery Time: 2–4 working days
📏 Large / Long Items (Length-Based Shipping)
For oversized items where the product length is 1.5 metres or more:
Conditions:
- Product length ≥ 1.5 m
- Cart weight ≤ 40 kg
Shipping Cost: £18.00 (flat rate)
Delivery Time: 2–4 working days
Collection from Store
Customers can also choose to collect their order from our store in
Reading, UK, at no additional charge. For any questions regarding shipping, please contact our support team at online@getplumb.co.uk.
