28mm × 15mm × 15mm End Feed Reducing Tee (Reduced End & Branch) — Copper
Free Local Shipping
Free Local Shipping on orders over £100. Standard delivery to most UK postcodes within 2-3 working days. Express options available at checkout.
Contact Us
Give Us A Call +44 118 958 8882 Our team is here to help. We will provide expert advice on specifications, compatibility, and delivery options.
30-day Easy Return
30 days Easy Return — no questions asked. If you're not completely satisfied, send it back within 14 days for a full refund.
The 28mm × 15mm × 15mm End Feed Reducing Tee connects 28mm and 15mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off the 28mm inlet, one run end steps down to 15mm and the branch is 15mm too. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.
This is a reduced end-and-branch tee — a run end (15mm) and the branch (15mm) are both reduced from the 28mm end.
Also known as: reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 28x15x15 tee, endfeed reducing tee.
- Manufactured to BS EN 1254-1 for capillary (solder) fittings
- Reduced end-and-branch tee — 28mm × 15mm × 15mm
- Fits copper tube to BS EN 1057
- WRAS approved
- Solder and flux required — not supplied
- Sold individually — buy exactly what the job needs
- Suitable for hot and cold water and heating services
End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.
Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.
