The 22mm × 28mm × 15mm End Feed Reducing Tee connects 22mm and 28mm in line (the run) with a 15mm branch at 90°. A stepped tee — the two run ends are different sizes (22mm and 28mm) and the branch is a reduced 15mm, letting you change run bore and take a small branch in one fitting. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced-end tee — the two run ends are different sizes (22mm and 28mm), with a 15mm branch.

Also known as: reducing tee, end reduced tee, stepped tee, unequal tee, 22x28x15 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced-end tee — 22mm × 28mm × 15mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required — not supplied
• Sold individually — buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.