Megaflo Eco SystemFit 210SF Indirect Unvented Hot Water Cylinder
Shipping time: 1ā3 days
This product is in stock and ready for quick delivery.
Get Free Delivery on Orders Over £60
For more details, please refer to our Shipping Information.
Description
The Megaflo Eco SystemFit 210SF is a 210-litre indirect unvented hot water cylinder designed for installation with a heat-only (regular) boiler. It goes one step further than the standard Megaflo Eco by adding factory-fitted plumbing and wiring ā reducing installation time and delivering a consistently neater appearance.
Factory fitted on the cylinder:
- Immersion heater (1 Ć 3kW) with thermal controls ā long-life Superloy 825 alloy sheathed element, pre-wired
- Temperature & pressure relief valve ā set at 90°C / 10 bar (BS EN 1490), with T&P insulation kit and 15/22mm tundish
- 8 bar pressure relief valve ā incorporating check valve
- Drain valve
- Wiring centre
- 3 Ć 22mm 2-port motorised valves ā pre-fitted and wired for CH zone 1, CH zone 2 and DHW
- Primary circulation pump ā Grundfos UPM3 Auto L 25-70, factory fitted
- Lock shield flow balancing valve
- Automatic differential bypass valve
- Internal floating baffle expansion vessel ā built into the cylinder shell; no separate DHW expansion vessel required
Supplied with the cylinder:
- Cold water inlet control kit ā 3 bar (0.3 MPa) pressure reducing valve incorporating strainer, with check valve (BS EN 1567, BS EN 1491, EN 13959)
| Specification | Value |
|---|---|
| Nominal capacity | 210 litres |
| Height | 1486mm |
| Width | 630mm |
| Depth | 720mm |
| Weight empty / full | 55 kg / 254 kg |
| Standing heat loss | 1.42 kWh/24h |
| Max flow at 3 bar | 76 l/min |
| Max flow at 1 bar | 45 l/min |
| Heat-up time (15 l/min, 80°C primary, 15°Cā60°C) | 28 min |
| Recovery 70% draw-off | 19 min |
| Backup immersion | 1 Ć 3kW @ 240V |
| Operating pressure | 3 bar (0.3 MPa) |
| Max mains pressure | 16 bar (1.6 MPa) |
| Min recommended supply pressure | 1.5 bar / 20 l/min |
| Inner vessel | High grade duplex stainless steel |
| Insulation | 60mm CFC/HCFC-free polyurethane foam |
| ERP rating | B |
| Product code | 95050453 |
Shipping Information
AtĀ GetPlumb, we strive to provide reliable and cost-effective delivery options to our customers. Please review our shipping policy below.
š Free Local Delivery (Orders Ā£60 & above)
We offer FREE delivery on orders £60 or more for selected local areas.
Eligible Postcodes Include:
- RG*
- SL*
- OX10*, OX11*, OX49*
- HP1*, HP3*, HP8*, HP9*, HP10*, HP11*, HP12*, HP13*, HP14*
- WD*, HA*, UB*, TW*, KT*
- W1* ā W9*
- NW*, SW*
Delivery Time: 2ā4 working days
Shipping Cost: £0.00
š¦ Standard Shipping (Weight-Based Rates)
For orders that do not qualify for free delivery, standard shipping rates apply based on total cart weight.
- For cart weight between 0ā5 kg, the shipping cost is Ā£2.99 with a delivery time of 2ā4 working days.
- For cart weight between 5ā25 kg, the shipping cost is Ā£7.99 with a delivery time of 2ā4 working days.
- For cart weight between 26ā40 kg, the shipping cost is Ā£15.98 with a delivery time of 2ā4 working days.
- For cart weight of 41 kg and above, the shipping cost is Ā£31.96 with a delivery time of 2ā4 working days.
š§± Block Salt (Harveyās) ā Unit-Based
Shipping
This rate applies only to Harveyās block salt products.
- £7.99 is charged for every 3 items.
- The charge increases by £7.99 for each additional set of 3 items.
Examples:
- 1ā3 items ā Ā£7.99
- 4ā6 items ā Ā£15.98
- 7ā9 items ā Ā£23.97
Delivery Time: 2ā4 working days
š Large / Long Items (Length-Based Shipping)
For oversized items where the product length is 1.5 metres or more:
Conditions:
- Product length ā„ 1.5 m
- Cart weight ⤠40 kg
Shipping Cost: £18.00 (flat rate)
Delivery Time: 2ā4 working days
Collection from Store
Customers can also choose toĀ collect their orderĀ from our store in
Reading, UK, at no additional charge.
For any questions regarding shipping, please contact our support team atĀ online@getplumb.co.uk.