End Feed Copper Fittings

The 54mm × 54mm × 35mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 35mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 28mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 28mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 22mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 54mm × 54mm × 15mm End Feed Reducing Tee runs straight through at 54mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 42mm × 42mm × 35mm End Feed Reducing Tee runs straight through at 42mm and takes a reduced 35mm branch at 90°. A reduced-branch tee — for takin...

The 42mm × 42mm × 28mm End Feed Reducing Tee runs straight through at 42mm and takes a reduced 28mm branch at 90°. A reduced-branch tee — for takin...

The 42mm × 42mm × 22mm End Feed Reducing Tee runs straight through at 42mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 42mm × 42mm × 15mm End Feed Reducing Tee runs straight through at 42mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 35mm × 35mm × 28mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 28mm branch at 90°. A reduced-branch tee — for takin...

The 35mm × 35mm × 22mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 28mm × 28mm × 22mm End Feed Reducing Tee runs straight through at 28mm and takes a reduced 22mm branch at 90°. A reduced-branch tee — for takin...

The 35mm × 35mm × 15mm End Feed Reducing Tee runs straight through at 35mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 28mm × 28mm × 15mm End Feed Reducing Tee runs straight through at 28mm and takes a reduced 15mm branch at 90°. A reduced-branch tee — for dropp...

The 15mm × 15mm × 10mm End Feed Reducing Tee runs straight through at 15mm and takes a reduced 10mm branch at 90°. A reduced-branch tee — for dropp...

The 54mm End Feed Equal Tee splits a 54mm copper run three ways — two ends in line and one branch at 90°, all 54mm. The largest equal tee in the ra...

The 42mm End Feed Equal Tee splits a 42mm copper run three ways — two ends in line and one branch at 90°, all 42mm. Used on 42mm commercial risers ...

The 35mm End Feed Equal Tee splits a 35mm copper run three ways — two ends in line and one branch at 90°, all 35mm. Used on 35mm commercial risers ...

The 28mm End Feed Equal Tee splits a 28mm copper run three ways — two ends in line and one branch at 90°, all 28mm. Used on 28mm primaries and grav...

The 15mm End Feed Equal Tee splits a 15mm copper run three ways — two ends in line and one branch at 90°, all 15mm. The everyday branch tee on dome...

The 10mm End Feed Equal Tee splits a 10mm copper run three ways — two ends in line and one branch at 90°, all 10mm. Used to take a 10mm branch off ...

The 8mm End Feed Equal Tee splits an 8mm copper run three ways — two ends in line and one branch at 90°, all 8mm. Used to take an 8mm branch off an...

The 22mm × ¾" End Feed Bent Tap Connector joins 22mm copper tube to a ¾" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...

The 15mm × ¾" End Feed Bent Tap Connector joins 15mm copper tube to a ¾" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...

The 15mm × ½" End Feed Bent Tap Connector joins 15mm copper tube to a ½" BSP tap or valve tail with a built-in 90° bend. The soldered capillary end...