Bathroom • Basin Wastes
Premium Chrome Click-Clack Extended Basin Waste (No Overflow) — Ø66 mm Plug, 130 mm Body (Made in Spain)
If you’ve ever tried to fit a standard basin waste through a thick worktop or a tall vessel basin and found the shank simply isn’t long enough, this is the upgrade you need. Our premium chrome click-clack extended basin waste (no overflow) features a 130 mm body length and a broad Ø66 mm cap, delivering reliable sealing, a sleek modern look, and the reach required for vessel/countertop installations and thicker vanity tops. Precision-engineered in Spain for smooth push-to-open, push-to-close operation.
Why installers choose this extended no-overflow waste
- Extended 130 mm body — reaches comfortably through thick worktops/vanities and tall vessel basins.
- No-overflow design — purpose-built for basins without an overflow hole (typical of countertop/vessel styles).
- Ø66 mm low-profile cap — generous coverage, clean lines, premium chrome finish.
- Click-clack mechanism — simple push to open/close; smooth, positive action.
- Durable brass construction with high-quality chrome plating.
- Standard 1¼″ connection — mates with common bottle traps and waste kits.
- Made in Spain — tight tolerances and excellent finish quality.
Technical specification
Will it fit my basin?
This model is designed for basins without an overflow and uses a standard 1¼″ connection. It’s especially useful when your basin + worktop stack height is greater than a regular waste can handle. As with any installation, confirm your basin’s waste hole size (typically ~45–50 mm) and ensure your bottle trap is 1¼″.
Quick installation overview
- Apply a thin bead of sanitary sealant beneath the chrome cap/flange.
- Insert the waste through the basin/worktop from above.
- From below, seat the washer(s) and tighten the back-nut evenly—do not overtighten.
- Connect to your 1¼″ bottle trap; check alignment and compression seals.
- Allow sealant to cure, then fill/hold to test for watertight seal and click-clack operation.
Order with confidence from GetPlumb
- Fast UK delivery & Click & Collect in Reading.
- Trade-trusted merchant — helpful advice on parts & compatibility.
- Questions? Call 0118 958 8882 or message us.
FAQs
Does this work with basins that have an overflow?
No. This is a no-overflow waste. If your basin has an overflow hole, choose an overflow-compatible waste instead.
Is the 130 mm length measured overall?
130 mm refers to the extended body/shank length that passes through the basin/worktop stack, giving extra reach versus standard wastes.
What size bottle trap do I need?
A standard 1¼″ bottle trap.
Will the Ø66 mm cap cover my basin hole neatly?
Yes—Ø66 mm provides generous coverage around typical basin waste apertures for a clean, premium look.
Can I Click & Collect?
Yes—select Click & Collect at checkout for pickup from our Reading trade counter.
