Siamp Skipper 45 and 99B WC Flush and Fill Component Pack
The Siamp Skipper 45/99B component pack combines the matched filling and flushing parts listed below for a coordinated WC cistern repair. It is supplied as one manufacturer pack under Siamp part number 33995007. Replacing both mechanisms together is useful where the cistern needs a broader internal service. Check both valve arrangements against the cistern before ordering.
| Brand | Siamp |
| Model | Skipper 45/99B |
| Manufacturer part no. | 33995007 |
| Pack quantity | 1 |
Siamp supplies a spanner, close-coupling bolts and a spare inlet diaphragm washer in this pack; a tap connector is not included and an approved check valve is required at the supply. Hand-tighten the flush valve nut and inlet backnut to the ceramic and add no more than a quarter turn — over-tightening damages either mechanism and is not covered by Siamp’s warranty. Use no sealing paste or compound. Position the small flush float opposite the inlet valve, 20 mm below the water line, and set the water level 20 mm below the overflow. Use no limescale or chlorine cleaners in the cistern.
Specification sheets: Skipper 45 flush valve (PDF) · Compact 99B filling valve (PDF) · Installation manual (PDF) · See related WC cistern parts.
