{"title":"End Feed Copper Fittings","description":"\u003cp\u003eBrowse our range of end feed copper fittings available in multiple sizes\u003c\/p\u003e","products":[{"product_id":"28mm-22mm-15mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"28mm × 22mm × 15mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 28mm × 22mm × 15mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off the 28mm inlet, one run end steps down to 22mm and the branch is a reduced 15mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (22mm) and the branch (15mm) are both reduced from the 28mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 28x22x15 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 28mm × 22mm × 15mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280241385808,"sku":"EFT282215","price":2.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"28mm-22mm-22mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"28mm × 22mm × 22mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 28mm × 22mm × 22mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 22mm branch at 90°. A reduced end-and-branch tee — off the 28mm inlet, one run end steps down to 22mm and the branch is a reduced 22mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (22mm) and the branch (22mm) are both reduced from the 28mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 28x22x22 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 28mm × 22mm × 22mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280241975632,"sku":"EFT282222","price":2.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"35mm-28mm-15mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"35mm × 28mm × 15mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 35mm × 28mm × 15mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 15mm branch at 90°. A reduced end-and-branch tee — off the 35mm inlet, one run end steps down to 28mm and the branch is a reduced 15mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (28mm) and the branch (15mm) are both reduced from the 35mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 35x28x15 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 35mm × 28mm × 15mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280250659152,"sku":"EFT352815","price":3.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"35mm-28mm-22mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"35mm × 28mm × 22mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 35mm × 28mm × 22mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 22mm branch at 90°. A reduced end-and-branch tee — off the 35mm inlet, one run end steps down to 28mm and the branch is a reduced 22mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (28mm) and the branch (22mm) are both reduced from the 35mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 35x28x22 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 35mm × 28mm × 22mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280251085136,"sku":"EFT352822","price":4.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"35mm-28mm-28mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"35mm × 28mm × 28mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 35mm × 28mm × 28mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 28mm branch at 90°. A reduced end-and-branch tee — off the 35mm inlet, one run end steps down to 28mm and the branch is a reduced 28mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (28mm) and the branch (28mm) are both reduced from the 35mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 35x28x28 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 35mm × 28mm × 28mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280256065872,"sku":"EFT352828","price":4.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"42mm-35mm-28mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"42mm × 35mm × 28mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 42mm × 35mm × 28mm End Feed Reducing Tee connects 42mm and 35mm in line (the run) with a 28mm branch at 90°. A reduced end-and-branch tee — off the 42mm inlet, one run end steps down to 35mm and the branch is a reduced 28mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (35mm) and the branch (28mm) are both reduced from the 42mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 42x35x28 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 42mm × 35mm × 28mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280258064720,"sku":"EFT423528","price":9.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"42mm-35mm-35mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"42mm × 35mm × 35mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 42mm × 35mm × 35mm End Feed Reducing Tee connects 42mm and 35mm in line (the run) with a 35mm branch at 90°. A reduced end-and-branch tee — off the 42mm inlet, one run end steps down to 35mm and the branch is a reduced 35mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (35mm) and the branch (35mm) are both reduced from the 42mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 42x35x35 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 42mm × 35mm × 35mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280258556240,"sku":"EFT423535","price":7.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"54mm-42mm-42mm-end-feed-reducing-tee-reduced-end-branch-copper","title":"54mm × 42mm × 42mm End Feed Reducing Tee (Reduced End \u0026 Branch) — Copper","description":"\u003cp\u003eThe 54mm × 42mm × 42mm End Feed Reducing Tee connects 54mm and 42mm in line (the run) with a 42mm branch at 90°. A reduced end-and-branch tee — off the 54mm inlet, one run end steps down to 42mm and the branch is a reduced 42mm. The largest end-and-branch tee in the range, for plant room headers and commercial risers. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced end-and-branch tee\u003c\/strong\u003e — a run end (42mm) and the branch (42mm) are both reduced from the 54mm end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 54x42x42 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced end-and-branch tee — 54mm × 42mm × 42mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280259703120,"sku":"EFT544242","price":12.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_4.jpg?v=1784207957"},{"product_id":"15mm-15mm-22mm-end-feed-reducing-tee-reduced-ends-copper","title":"15mm × 15mm × 22mm End Feed Reducing Tee (Reduced Ends) — Copper","description":"\u003cp\u003eThe 15mm × 15mm × 22mm End Feed Reducing Tee runs at 15mm on both ends with a larger 22mm branch at 90°. A reduced-ends tee — the branch is the biggest connection, so both run ends are effectively reduced relative to it. Handy where a 22mm branch is taken from a 15mm run. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced-ends tee\u003c\/strong\u003e — both run ends (15mm) are smaller than the 22mm branch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, reduced ends tee, both ends reduced tee, unequal tee, 15x15x22 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced-ends tee — 15mm × 15mm × 22mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280260489552,"sku":"EFT151522","price":1.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_5.jpg?v=1784207957"},{"product_id":"22mm-22mm-28mm-end-feed-reducing-tee-reduced-ends-copper","title":"22mm × 22mm × 28mm End Feed Reducing Tee (Reduced Ends) — Copper","description":"\u003cp\u003eThe 22mm × 22mm × 28mm End Feed Reducing Tee runs at 22mm on both ends with a larger 28mm branch at 90°. A reduced-ends tee — the branch is the biggest connection, so both run ends are effectively reduced relative to it. Used where a 28mm branch is taken from a 22mm run. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a reduced-ends tee\u003c\/strong\u003e — both run ends (22mm) are smaller than the 28mm branch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e reducing tee, reduced ends tee, both ends reduced tee, unequal tee, 22x22x28 tee, endfeed reducing tee.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to BS EN 1254-1 for capillary (solder) fittings\u003c\/li\u003e\n\u003cli\u003eReduced-ends tee — 22mm × 22mm × 28mm\u003c\/li\u003e\n\u003cli\u003eFits copper tube to BS EN 1057\u003c\/li\u003e\n\u003cli\u003eWRAS approved\u003c\/li\u003e\n\u003cli\u003eSolder and flux required — not supplied\u003c\/li\u003e\n\u003cli\u003eSold individually — buy exactly what the job needs\u003c\/li\u003e\n\u003cli\u003eSuitable for hot and cold water and heating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnd feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: \u003ca href=\"\/blogs\/guides\/how-to-solder-end-feed-fittings\"\u003eHow to solder end feed fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/end-feed-tees\"\u003eequal tees\u003c\/a\u003e, \u003ca href=\"\/collections\/end-feed-couplers\"\u003ecouplers\u003c\/a\u003e and \u003ca href=\"\/collections\/end-feed-fittings\"\u003ethe full end feed range\u003c\/a\u003e. Ordering for a whole job? Use the \u003ca href=\"\/collections\/end-feed-fittings\"\u003ebulk fittings matrix\u003c\/a\u003e.\u003c\/p\u003e","brand":"MasterFlow","offers":[{"title":"Default Title","offer_id":53280261013840,"sku":"EFT222228","price":2.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/5268\/4624\/files\/EFT_-_5.jpg?v=1784207957"}],"url":"https:\/\/getplumb.co.uk\/collections\/end-feed-copper-fittings.oembed","provider":"Getplumb","version":"1.0","type":"link"}